Home » Electronics » FET » SFF75N06-28 Transistor

SFF75N06-28 MOSFET Transistor

The SFF75N06-28 is a N-Channel metal-oxide semiconductor field-effect transistor (MOSFET) is the most common type of field-effect transistor (FET). This transistor has a three-terminal device with Gate (G), Drain (D) and Source (S) terminals.

Circuit diagram symbol of the SFF75N06-28 transistor as follows.

SFF75N06-28 Transistor Specification

Transistor Code		SFF75N06-28
Transistor Type		MOSFET
Control Channel Type		N-Channel
Package		28-PIN-CLCC
Drain-Source Voltage (Maximum)	V_DS	100V
Gate-Source Voltage (Maximum)	V_GS	20V
Drain Current (Maximum)	I_D	30A
Drain-Source On-State Resistance (Maximum)	R_DS(on)	0.025Ohm
Power Dissipation (Maximum)	P_D	35W
Drain-Source Capacitance		700pF
Operating Junction Temperature (Maximum)		150°C
Rise Time		35nS
Gate-Threshold Voltage (Maximum)		4V

SFF75N06-28 MOSFET Transistor Overview

The SFF75N06-28 is a transistor, a MOSFET, used for on and off switching in electrical gadgets and power control applications. It is a N-Channel MOSFET, which means it conducts when a positive voltage is applied to the gate with respect to the source.

This device comes in a 28-PIN-CLCC package, making it suitable for projects that require moderate power handling and reliable switching performance.

Key Electrical Characteristics of the SFF75N06-28 MOSFET

Followings are the key electrical characteristics of the SFF75N06-28 MOSFET transistor

Maximum Drain-Source Voltage (V_DS)

The maximum drain-source voltage that can safely block between drain and source in SFF75N06-28 MOSFET transistor is 100V.

This is the highest voltage the MOSFET transistor can safely block between the drain and source without damadging to the transistor.

Maximum Gate-Source Voltage (V_GS)

The maximum safe voltage that can be used between the gate and source of the SFF75N06-28 MOSFET transistor is 20V without any harm. This limit should not be exceeded to prevent damage from the gate voltage.

Maximum Drain Current (I_D)

The maximum continuous current flowing between the drain and source of the SFF75N06-28 MOSFET transistor is 30A. This is the highest current that can safely flow between drain and source without damaging the MOSFET transistor.

Drain-Source On-State Resistance (R_DS(on))

The internal resistance between the drain and source of SFF75N06-28 MOSFET transistor when the transistor is fully turned on is 0.025 Ohm that defines the amount of lost power that is wasted as heat when the transistor is operating.

Maximum Power Dissipation (P_D)

The maximum power that the SFF75N06-28 MOSFET transistor can comfortably transfer into heat without breaking is 35W. This indicates the amount of power that can safely be dissipated to the device as heat.

Drain-Source Capacitance

The capacitance between drain and source of the SFF75N06-28 MOSFET transistor is 700pF. This value influences to the switching speed of the SFF75N06-28 MOSFET transistor and the high-frequency performance.

This is the ability to hold a small electric charge between the drain and source of a MOSFET transistor, like a tiny built-in capacitor.

Rise Time

The time that the drain current or output voltage increases between low to high when the SFF75N06-28 MOSFET transistor is switched on is 35nS. This is the rate at which SFF75N06-28 MOSFET transistor switches on.

This shows how fast the MOSFET transistor switched on.

Thermal Performance of the SFF75N06-28 MOSFET

Maximum Operating Junction Temperature

The maximum internal temperature of the semiconductor junction of SFF75N06-28 MOSFET transistor can be safely operated at the 150°C without damaging the transistor.

UXPython is not the creator or an official representative of the SFF75N06-28 MOSFET transistor. You can download the official SFF75N06-28 MOSFET transistor datasheet to get more infromation about this transistor.

Note : Copyrighted materials belong to their creator or official representative.